Intellitec Water Pump Controller, 00-00776-200 - Free Shipping
Intellitec Water Pump Controller, 00-00776-200 - Free Shipping
Alternative Views:

Pacific Rv Price: $52.00
Note: Email if you have any questions about this item.

Product Code: 776-200-INTELLITEC-MODULE

Intellitec Water Pump Controller, 00-00776-200
This unit will only work with loads greater than 5 amps but less than 15 amps.

Potted assembly resists water damage.
Intellitecs Water Pump Controller, first in the family of MONOPLEX devices, offers the following benefits to water pump switching.
Minimizes the use of heavy gauge wire runs throughout the coach. Only two 14 gauge wires need to be run from the power source to the pump.
Multipoint switching can be added anywhere along the network using simple wiring.
Signaling from multiple points along the single wire MONOPLEX can be easily accomplished with inexpensive switches providing momentary contact to ground.
Simplified switches (momentary buttons) increase reliability.
Negligible standby current makes this system superior to conventional multipoint relay switching.
Labor and initial installation costs are reduced, compared to multipoint switching using conventional switching.
The MONOPLEX Water Pump Controller is designed to operate as a low side�, remote switch in 12 volt DC systems. As its name implies, it was designed to control the domestic water pump. Its use, however, is not limited to that. It can also be used to control a variety of other loads such as lighting, other pumps, fans, etc., when it is convenient to switch the ground side. The unit is packaged in a plastic enclosure for mounting near the water pump with two flathead screws. It is capable of operating multiple switch points (as many as desired) and up to two LED power indicators may be utilized all on the same single wire. Power can be supplied from either the battery or converter and the controller is reverse polarity protected.

This unit will only work with loads greater than 5 amps but less than 15 amps.

Wiring Harness 11-00250-000 dual wiper connector harness can be used.
Operating Voltage 10.0-16.0 VDC
Current Carrying Capabilities 5 – 15 Amps Max
Standby Current Draw 2.0 mA

Note: Electronic Items are Non-Returnable.

Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
Intellitect Water Pump Controller December 30, 2017
Reviewer: Warren Morris from San Dimas, CA United States  
Received 2nd working day. Great service.

Was this review helpful to you?